ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 - Manual (Page 104)

Prestige 324 Intelligent Broadband Sharing Gateway
Remote Node Setup 9-7
Table 9-3 Fields in Menu 11.1 (PPPoE Encapsulation Specific Only)
FIELD DESCRIPTION EXAMPLE
Schedules You can apply up to four schedule sets here. For more details
please refer to the Call Scheduling chapter.
Nailed-Up
Connection
This field specifies if you want to make the connection to this
remote node a nailed-up connection. More details are given
earlier in this section.
Session Options
Idle Timeout
This value specifies the idle time (i.e., the length of time there is
no traffic from the Prestige to the remote node) in seconds that
can elapse before the Prestige automatically disconnects the
PPPoE connection. This option only applies when the Prestige
initiates the call. 300 seconds
(default)
9.3 Edit IP Remote Node Network Layer Options
Move the cursor to the Edit IP field in Menu 11.1, then press the [SPACE BAR] to set the value to Yes.
Press [ENTER]
to open Menu 11.3 - Remote Node - Network Layer Options.
This menu displays the My WAN Addr field for PPPoE and PPTP encapsulations and Gateway IP
Addr field for Ethernet encapsulation.
Figure 9-4 Remote Node Network Layer Options
The next table gives you instructions about configuring remote node network layer options.
Menu 11.3 - Remote Node Network Layer Options
IP Address Assignment= Dynamic
Rem IP Address= N/A
Rem IP Subnet Mask= N/A
My WAN Addr=0.0.0.0
Network Address Translation= SUA only
Metric= 1
Private= No
RIP Direction= None
Version= N/A
Multicast= None
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.