Xerox 83xx - Manual (Page 18)

3-4
3.2.2 Mounting the brackets for the tensioning bars
3.2.2.1 On a Spitfire, Rockhopper 3 and Viper
Parts and Tools needed
No Description Quantity
1 Right bracket 1
2 Left bracket 1
3 Hexagon bolt M6x16 8
4 Plain washer M6 8
5 Spring washer M6 8
6 Tooth lock washer M6 1
7 Hexagon wrench 5 mm 1
Instructions
Step 1 : Mount the left and right bracket to the bottom of the X-rail.
Note that the positioning of the left and right bracket is different depending on the size of the
machine.
No Description
1 Left bracket arm
2 Unused holes
3 Left leg of the printer stand
4 Right leg of the printer stand
5 Right bracket arm
Step 2 :
Fix the screws of the right bracket.
On the Left Bracket, install 4 screws on the right side and 2 screws on the left side in the center.
Do NOT fix the screws of the left (adjustable) bracket yet.
No Description
1 Hexagon bolt M6x16
2 Spring washer M6
3 Plain washer M6