Xerox 83xx - Manual (Page 22)

3-8
3.2.4 Mounting the PCB Box
Parts and Tools needed
No Description Quantity
1 PCB Box 1
2 Screw M5x8 2
3 Washer M5 4
4 Hexagon wrench 3 mm 1
Procedure
Step 1 :
Mount the two screws with each two spacers to the stand.
Step 2 : Place the PCB Box (2) against the stand and slide it with the holes over the screws (1) and push
it downwards until it is fixed.