Zoom HD16 - Manual (Page 19)

Installing the CD-R/RW Drive
ZOOM HD8/HD16 19
Rear panel side
CD-R/RW drive bay side
Power cable Flat cable
Right side panel
4.
Plug the power cable and flat cable from the main
unit into the respective connectors on the CD-R/
RW drive.
5.
Push the CD-R/RW drive all the way into the bay,
so that the screw holes on the bottom of the HD8/
HD16 and the screw holes of the CD-R/RW drive
are aligned.
6.
Fasten the CD-R/RW drive with the four supplied
panhead screws. Then reattach the bottom plate
with the screws removed in step 2.
NOTE
• Use only the dedicated CD-R/RW drive CD-02(made by ZOOM
Corporation) or our recommendation drive (For details our
recommendation drive, see our website : http://www.zoom.co.jp)
• ZOOM Corporation will not accept any responsibility for damage or
third-party claims arising from using any other drive.