Zenoah CHTZ2401 - Manual (Page 6)

3. Warning labels on the machine
6
English
For safe operation and maintenance, symbols are
carved in relief on the machine. According to these
indications, please be careful not to take a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position:
FUEL TANK CAP
(b) The direction to close the choke
Position:
AIR CLEANER COVER
(c) The direction to open the choke
Position:
AIR CLEANER COVER
IMPORTANT ENGINE INFORMATION
THIS ENGINE MEETS U.S. EPA PH2 AND 2006
CALIFORNIA EMISSION REGULATIONS FOR SI
SORE’s. COMPLIANCE PERIOD : CATEGORY A
ENGINE FAMILY : 6KZXS.0244XY ; EM
ENGINE DISPLACEMENT : 24cc
REFER TO OWNER’S MANUAL FOR MAINTE-
NANCE SPECIFICATIONS AND ADJUSTMENTS.
MANUFACTURED:
MADE IN JAPAN
■ EMISSION CONTROL
An emission control label is located on the engine.
(1) Read owner's manual before operating this
machine.
(2) Wear head, eye and ear protection.
(3) Handling this machine improperly could result
in accidents causing serious injury or death.
Read this manual carefully and practice using
the hedge-trimmer until you are fully acquainted
with all operations and have learned to use it
correctly.
(4) This is extremely sharp and can easily cause
cuts.
If warning label peel off or become soiled and
impossible to read, you should contact the dealer from
which you purchased the product to order new labels
and affix them in the required location(s).
Never modify your machine.
We won’t warrant the machine, if you use the
remodeled hedge-trimmer or you don’t observe the
proper usage written in the manual.
WARNING
IMPORTANT
4. Symbols on the machine
(1)
(2)
(3)
(4)