Xantrex Technology GT 2.5-DE - Manual (Page 31)

Mounting the Inverter
975-0253-01-01 2–11
This chapter describes the first step: mounting the inverter and installing
accessories.
Mounting steps Instructions for mounting the GT Inverter are described in the following sections:
• “Installing the Mounting Bracket” on page 2–12
• “Mounting the Inverter on the Bracket” on page 2–16.
Tools and Materials Needed
• Assorted screwdrivers, drill, etc.
• Level
• Mounting support material, such as plywood or poles
• Wood screws, anchors for screws, depending on mounting surface.
Dimensions
The dimensions of the inverter are shown in Figure 2-4.
Figure 2-4 GT Inverter Dimensions
40.3 cm
15.9"
55.1 cm
21.7"
52.1 cm
20.5"
59.7 cm
23.5"
10.2 cm
4"
14.6 cm
5.7"
Flange and
Mounting Slots Communication
ports cover