Zanussi ZWF 1850 W - Manual (Page 18)

18
Settings
Settings are special functions that remain perma-
nently stored independent of each washing cycle –
even after the appliance has been switched off.
Memory 1, 2, 3
Programme combinations can be stored at pro-
gramme knob positions MEMORY 1, 2, 3 and can
then be selected using the programme knob. To do
this the desired programme combination is first put
together and then stored.
Setting the Memory
Example: Programme position MEMORY 1 is to be
given the following programme combination: SYN-
THETICS 60 °C, 700 rpm, with PREWASH.
1. Turn the programme knob to SYNTHETICS.
2. Press the TEMP. key repeatedly, until 60 °C ap-
pears in the display.
3. Press the SPIN key repeatedly, until 700 appears in
the display.
4. Using the OPTIONS key set PREWASH and
press the CHANGE key.
A black bar appears under the PREWASH
symbol
.
5. Press the OPTIONS key repeatedly, until the SE-
TUP symbol flashes.
6. Press the CHANGE key. The display changes to
the Settings Options level. Programme memory
position MEMORY 1 is offered as the first option.
3
To change to another memory position, press
the OPTIONS key.
7. Presss the CHANGE key.
The programme combination is now stored to pro-
gramme knob position MEMORY 1 and in the fu-
ture can be selected directly using the programme
knob.
Changing the Memory
1. Put together the new programme combination as
required (for an example, see “Setting the Memo-
ry”, steps 1 to 4).
2. Press the OPTIONS key repeatedly, until the SE-
TUP symbol flashes.
3. Press the CHANGE key.
4. Using the OPTIONS key select the memory posi-
tion to be changed, e. g. MEMORY 1.
5. Store the new programme combination using
the CHANGE key.
M e m o r y 1
S t o r e p r o g r a m m e ?
aaýýýýýaaaaaaaEa
Temp. Spin Options Change Exit