Zanussi ZWF 1850 W - Manual (Page 29)

29
Removing the transit pack-
aging
Important! Be sure to remove all the components of
the transit packaging prior to using the appliance for
the first time. Keep the transit packaging in a safe
place, in case it is needed at a later date when the
appliance is to be moved
(e.g. moving house).
1. Open the two hose retainers located at the rear of
the appliance and remove the hoses and electrical
cable.
2. Remove the two hose retainers from the appliance
with a strong tug.
3
Special spanner A and sealing caps B (2 units)
and C (1 unit) come with the appliance.
3. Use special spanner A to remove screw D and the
compression spring.
4. Turn sealing cap C upside down as shown in the il-
lustration.
5. Use sealing cap C to cap the hole.
6. Use special spanner A to remove the two screws
E.
7. Use special spanner A to remove the four screws F.
8. Remove transit bar G.
9. Screw in the four screws F again.
10.Use sealing caps B to cap the two large holes.
Important: Press all sealing caps B (2 items) and C
(1 item) in firmly so that they snap into the rear wall.