Zanussi ZWF 1850 W - Manual (Page 20)

20
Clock
1. Turn the programme knob to any programme and
press the OPTIONS key repeatedly until the SE-
TUP symbol
flashes.
2. Presss the CHANGE key.
3. Press the OPTIONS key repeatedly, until CLOCK is
shown in the display.
4. Using the CHANGE key set the desired time. With
each press of the key, the display moves on by one
minute. If the key is kept pressed, the display
changes in 10 minute steps.
5. Press the EXIT key twice.
Contrast and Brightness
1. Turn the programme knob to any programme and
press the OPTIONS key repeatedly until the SE-
TUP symbol
flashes.
2. Press the CHANGE key.
3. Press the OPTIONS key repeatedly, until the dis-
play shows CONTRAST or BRIGHTNESS.
4. Press the CHANGE key. With each press of the key
or if the key is kept pressed down, the black trian-
gle in the diagram moves further to the right for
more contrast or brightness. If the triangle reaches
the right hand edge, it starts again from the left.
5. Press the EXIT key twice.
C l o c k : 11.17
S e t t i m e
aaýýýýýaaaaaaaEa
Temp. Spin Options Change Exit
C o n t r a s t
ƒ … … … … ™ … … … … ‡
aaýýýýýaaaaaaaEa
Temp. Spin Options Change Exit