Zanussi ZKT6050 - Manual (Page 11)

11
4. To set the length of cooking time, press the
Selector Control button
until the 'Cook
Time' indicator neon is illuminated.
Press the increase control until the
required length of cooking time is displayed.
Press the decrease control
if necessary.
5. Release the buttons. The 'Cook Time'
indicator neon
will illuminate and the
time of day will be displayed after 5 seconds.
6. The heat indicator neon will flash untill the
oven has reached the desired temperature.
To cancel an automatic
programme
1. To cancel an automatic programme press the
Selector Control button
until the 'Cook
Time' indicator neon flashes. Press the
decrease control until the display reads
00:00.
2. Release the buttons. The 'Cook Time'
indicator neon
will flash and after 5
seconds return to the time of day.
3. Turn off the oven controls.
To return the appliance to
manual
At the end of a timed cooking period, the 'End
Time' indicator neon
will flash and an alarm
will sound for up to 2 minutes.
1.
To stop the sound, press any button.
2. Turn off the oven controls.
Things to note
In the event of an interruption of the electricity
supply, the timer will reset it self to zero and all
programming will be cancelled.
Automatic cooking
It is advisable to leave food in the oven for as short
a time as possible before automatic cooking.
Always ensure commercially prepared food is well
within its use by date and that home prepared food
is fresh and of good quality.
When cooking is complete, do not leave food to
stand in the oven, but remove and cool it quickly if
the food is not to be consumed immediately.
Always ensure food in the oven has been
covered before cooking if it is not possible to
remove food immediately after cooking.