Zanussi ZKT6050 - Manual (Page 9)

9
The electronic timer
1 2 3 4
5 6 7
Key
1. Cook time indicator neon
2. Time indicator neon
3. Countdown indicator neon
4. End time indicator neon
5. Selector control
6. Decrease control
7. Increase control
IMPORTANT!
The time of day must be set before the main
oven will operate manually.
To set the time of day
The oven has a 24 hour clock.
When the electricity supply is first switched on,
the display will show 12:00 and the 'Time'
indicator neon
will flash.
To set the correct time press the increase
control button and if necessary, the
decrease control button until the correct time
on the 24 hour clock is reached. The 'Time'
indicator neon
will flash for 5 seconds and
then go out.
IMPORTANT!
The increase and decrease control buttons
operate slowly at first, and then more rapidly.
They should be pressed separately.
To set the countdown
The 'Countdown' gives an audible reminder at
the end of any period of cooking.
It is not part of the automatic control.
Set the oven control to the required function.
To set, press the Selector Control button
until the 'Countdown' indicator neon is
illuminated and the display reads 0:00.
To set the required time duration, press the
increase control until the display indicates
the interval to be timed. If necessary press the
decrease control
to achieve the correct time
interval.
IMPORTANT!
This must be completed within 5 seconds of first
pressing the Selector Control button.
During the operation of the 'Countdown', the
remaining time period will be shown in the
display.
When 90% of the time set has elapsed an
audible signal sounds.
The 'Countdown' will sound intermittently for up
to 2 minutes at the end of the timed period. The
sound can be stopped by pressing any button.