Zoom B22 - Manual (Page 15)

Editing a Patch
ZOOM B2 15
S B
5 5
Terminate the edit mode
To terminate the edit mode and
return to the play mode, set the
Module selector to the "PLAY"
position.
Select the effect type
To switch the effect type
of the selected module,
use the BANK [-]/[+] keys.
Change the parameter
value
To change the setting value of effect
parameters, use the Parameter knobs
1 – 3.
NOTE When you return to play mode and
select another patch, the changes
you have made in edit mode will be
lost unless you store the patch
first. To retain the changes, store
the patch as described on page 16.
NOTE When a module that is set to OFF is
selected, the display will show "oF".
NOTE If you press the BANK [-]/[+] keys for
a module that is set to OFF, the
module will be turned ON.
For modules that have only one
effect type, pressing the BANK [-]/[+]
keys has no effect.
Which parameter is assigned to a knob depends on
which effect module/effect type is selected. For
information on parameters for effect
modules/effect types, see page 23 – 30.
When you turn a Parameter knob, the
corresponding LED lights up and the display
briefly shows the current value of the respective
parameter.
EB2.fm 15 ページ ２００５年７月２７日 水曜日 午後４時１５分