Zoom B22 - Manual (Page 23)

Effect Types and Parameters
ZOOM B2 23
COMP/LIMIT
COMP/LIMIT (Compressor/Limiter) module
This module includes a compressor that keeps the overall signal level within a certain
range by attenuating high-level signal components or boosting low-level signal
components, and a limiter that suppresses peak components.
CP COMPRESSOR
The compressor attenuates high-level signal components and boosts low-level signal components to keep
the overall signal level within a certain range.
SENSE 0 – 10 ATTACK 1 – 10 LEVEL 2 – 98, 1.0
Adjusts the compressor sensitivity.
Higher setting values result in higher
sensitivity.
Adjusts the time between the sound
attack point and the start of
compression. Higher setting values
result in faster compression action.
Adjusts the signal level after passing the
module.
LM LIMITER
This is a limiter that suppresses signal peaks above a certain reference level.
THRESHOLD 0 – 10 RATIO 1 – 10 LEVEL 2 – 98, 1.0
Adjusts the reference signal level for the
limiter action.
Adjusts the limiter intensity. Higher
setting values result in stronger
compression of the input signal.
Adjusts the signal level after passing the
module.
WAH/EFX
WAH/EFX (Wah/Effects) module
Comprises wah and filter effects as well as VCA type effects.
AW AUTO WAH
This effect varies wah in accordance with playing intensity.
Ar AUTO RESONANCE FILTER
This effect varies the frequency band of the resonance filter according to the picking intensity.
The two effect types above have the same parameters.
POSI & DIR MIX
b0 – b9,
A0 – A9
SENSE -10 – -1, 1 – 10 RESONANCE 0 – 10
Selects the connection position of the
WAH/EFX module. The b0 - b9 settings
specify connection before the DRIVE/
SYNTH module, and the A0 - A9
settings specify connection after the HI
EQ module. The numbers 0 - 9 specify
the original sound mixing balance, with
higher values resulting in stronger
original sound.
Adjusts the effect sensitivity.
When set to a negative value, the
filter characteristics are inverted.
Adjusts the resonance of the sound.
oC OCTAVE
This effect adds a 1-octave lower component to the original sound.
OCT LVL 0 – 98, 1.0 DIR LVL 0 – 98, 1.0 TONE 0 – 10
Adjusts the mixing balance of the
effect sound (1-octave lower
sound).
Adjusts the mixing balance of the
original sound.
Adjusts the sound quality after mixing.
CP
LM
AW
AR
OC
EB2.fm 23 ページ ２００５年７月２７日 水曜日 午後４時１５分