Using an optional foot switch or pedal, Using the foot switch (fs01) – Zoom B22 User Manual

Page 18

Advertising
background image

ZOOM B2

18

Foot switch pressed

Pressed again

Original sound

Delay sound

Hold

Using an Optional Foot Switch or Pedal

The B2 is equipped with a [CONTROL IN] jack designed for connection of an optional foot switch or
expression pedal. This section explains how to use these accessories.

Using the foot switch (FS01)

Connecting the optional foot switch FS01 to the
[CONTROL IN] jack allows changing banks with
the foot switch while the unit is in play mode. It is
also possible to switch bypass/mute on and off,
control the tap tempo function, or perform other
functions with the foot switch.

1.

Plug the cable from the FS01 into the
[CONTROL IN] jack, and then turn the
B2 on.

2.

Set the Module selector to the
"CONTROL" position.

The B2 goes into edit mode. You can now make
settings for the expression pedal and foot switch.

3.

Turn Parameter knob 2 to select one
of the following functions for the foot
switch.

bP (bypass/mute)

The foot switch controls bypass or mute on/off.
This has the same effect as pressing both [

W

]/

[

Q

] foot switches at the same time in play

mode.

tP (tap tempo)

Pressing the foot switch repeatedly can be used
to set the interval for the rhythm function or to
make settings for effect parameters supporting
the tap function. This has the same effect as
pressing the [TAP] key.

bU (bank up)

Each push of the foot switch switches to the
next higher bank. This has the same effect as
pressing the BANK [+] key.

rH (rhythm on/off)

The foot switch controls start/stop of the
rhythm function. This has the same effect as
pressing the RHYTHM [

R

/

P

] key.

dH (delay hold)

The foot switch controls on/off of the delay
hold function. When a patch using the hold
function is selected, pressing the foot switch
will activate hold, causing the current delay
sound to be repeated (see illustration below).
Pressing the foot switch once more cancels the
hold condition, and the delay sound will decay
normally.

dM (delay input mute)

Switches the delay module input muting
between on and off.

EB2.fm 18 ページ 2005年7月27日 水曜日 午後4時15分

Advertising