Troubleshooting, 1 power, hardware connections, and leds, Chapter 16 troubleshooting – ZyXEL Communications V300 User Manual

Page 147: Troubleshooting (147)

Advertising
background image

V300 User’s Guide

147

C

H A P T E R

16

Troubleshooting

This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.

•

Power, Hardware Connections, and LEDs

•

Internet Access

•

Phone Calls and VoIP

16.1 Power, Hardware Connections, and LEDs

V

The V300 does not turn on. None of the LEDs turn on.

1 Make sure you are using the power adaptor or cord included with the V300.
2 Make sure the power adaptor or cord is connected to the V300 and plugged in to an

appropriate power source. Make sure the power source is turned on.

3 Disconnect and re-connect the power adaptor or cord to the V300.
4 If the problem continues, contact the vendor.

V

One of the keys or LEDs does not behave as expected.

1 Make sure you understand the normal behavior of the key or LED. See

Section 2.1 on

page 31

.

2 Check the hardware connections. See the Quick Start Guide and

Section 2.1 on page 31

.

3 Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4 Disconnect and re-connect the power adaptor to the V300.
5 If the problem continues, contact the vendor.

V

I forgot the IP address for the V300.

Advertising