ZyXEL Communications V300 - Manual (Page 84)

Chapter 6 LCD Menus: Advanced
V300 User’s Guide
84
Select Adv Setting > AutoPro > Protocol. The following screen displays.
Figure 102 LCD Menu: Auto Provision Protocol
This screen displays the auto-provisioning protocol already configured on the V300. Press
MENU to change the protocol, or press PHONEBOOK to return to the previous screen.
"
The V300 must use the same protocol as the auto-provisioning server.
6.4.1.1 Auto Provision Protocol - Edit
Press MENU in the Protocol screen. The following screen displays.
Figure 103 LCD Menu: Auto Provision Protocol - Edit
The following table describes the labels in this screen. Press MENU to save your changes, or
press PHONEBOOK to return to the previous screen.
6.4.2 Auto-provisioning Server Address
Use this screen to see or edit the IP address of the auto-provisioning server from which the
V300 gets the auto-provisioning file.
Select Adv Setting > AutoPro > Serv Addr. The following screen displays.
Figure 104 LCD Menu: Auto Provision Server Address
If an auto-provisioning server address is already configured on the V300, it displays in this
screen. Press MENU to edit the address, or press PHONEBOOK to return to the previous
screen.
6.4.2.1 Auto-provisioning Server Address - Edit
Press MENU in the Server Address screen. The following screen displays.
2 Protocol:
HTTP
2 Protocol:
1 TFTP?
Table 36 LCD Menu: Auto Provision Protocol - Edit
LABEL DESCRIPTION
TFTP Select this to use Trivial File Transfer Protocol.
HTTP Select this to use Hyper-Text Transfer Protocol.
HTTPS Select this to use secured HTTP.
3 Serv Addr: