ZyXEL Communications V300 - Manual (Page 63)

Chapter 5 LCD Menus: Basic Settings
V300 User’s Guide
63
For example, if you set the SK0 rule in the Speed Dial menu to call the number
“987654”, press and hold the 0 key to call “987654”.
5.6 The Advanced Setting Menu
Use this menu to configure network and SIP account settings, set the V300 to get its
configuration from an auto-provisioning server, or program the custom keys (see your Quick
Start Guide for hardware information). See
Chapter 6 on page 65 for information on the
Advanced Setting menu.
5.7 The System Restart Menu
Use this screen to restart the V300 without turning the power off. Select System Restart. The
following screen displays.
Figure 47 LCD Menu: System Restart
The following table describes the labels in this screen.
7 System Restart
Are You Sure?
Table 25 LCD Menu: System Restart
LABEL DESCRIPTION
Are You Sure? Press MENU to restart the V300.
Press PHONEBOOK to return to the previous screen without restarting the
V300.
Note: When you use this function, the V300’s settings do
NOT return to their factory defaults. If you want to reset
the V300 to its factory defaults, use the RESET button
on the rear of the device (see your Quick Start Guide
for hardware information).