3 dhcp, 3 the sip configuration menus, Table 30 lcd menu: sip account configuration – ZyXEL Communications V300 User Manual
Page 70
Chapter 6 LCD Menus: Advanced
V300 User’s Guide
70
Enter the new DNS server IP address and press MENU to save the change. Alternatively,
press PHONEBOOK to return to the previous screen.
6.2.3 DHCP
Use DHCP to have the V300 get an IP address automatically from a DHCP server on the
network.
Select Adv Setting > Network > DHCP. The following screen displays.
Figure 64 LCD Menu: DHCP
Press MENU to see whether DHCP is enabled on the V300 or not. Press MENU again to
change the configuration (turn DHCP on or off) or alternatively press PHONEBOOK to
return to the previous screen.
6.3 The SIP Configuration Menus
Use these menus to set up your V300 to use your existing Voice over Internet (VoIP) account.
"
Once you have configured the fields in these menus with the correct
information, the V300 must register with the SIP server. You may need to
restart the V300 to do this.
"
Enter information in these menus exactly as you received it from your VoIP
service provider. If you were not given information for any menu or field, leave
it at its default setting.
Select Adv Setting > SIP Setting. The following screen displays.
Figure 65 LCD Menu: SIP Setting
See the following sections for more information on each menu in this screen.
3 DHCP
1 Active
2 SIP Setting
1 Active
Table 30 LCD Menu: SIP Account Configuration
Active
SIP Number
see