ZyXEL Communications V300 - Manual (Page 82)

Chapter 6 LCD Menus: Advanced
V300 User’s Guide
82
"
Make no changes in this screen unless your service provider told you to.
Press Edit in the Outbound Proxy Server Port screen. The following screen displays.
Figure 98 LCD Menu: Outbound Proxy Server Port - Edit
Enter the new outbound proxy server port number (from 1024 to 65535) and press MENU to
save the change. Alternatively, press PHONEBOOK to return to the previous screen.
"
The port number can consist of numerals (0 ~ 9) only.
6.3.16 Call Forward Active
Turn CallFW Active on (Enable) to allow calls received on your SIP account to use the call
forwarding setting you configure in the Call Pref. > Call FW menu. Turn this off (Disable) to
deactivate call forwarding for calls received on your SIP account.
6.3.17 Backup SIP Server (1 and 2)
Use the Backup SIP menus to configure the details of up to two SIP servers that the V300
uses to make calls in the event that the primary SIP server is unavailable. If the primary SIP
server is unavailable, the V300 uses the first backup SIP server (1st BSIP) if configured. If the
primary SIP server and the first backup SIP server are unavailable, the V300 uses the second
backup SIP server (2nd BSIP) if configured.
Select Adv Setting > SIP Setting > BackupSIP. The following screen displays.
Figure 99 LCD Menu: Backup SIP Server
Select the backup SIP server you want to configure, or press PHONEBOOK to return to the
previous screen.
6.3.17.1 First / Second Backup SIP Server
Use these screens to configure details of the backup SIP server(s).
Select 1st BSIP or 2nd BSIP in the Adv Setting > SIP Setting > BackupSIP menu (use 1st
BSIP first). A screen similar to the following displays (this example uses the 1st BSIP
screen).
3 Server Port:
5060
19 BackupSIP:
1 1st BSIP