Xterasys Wireless LAN Card - Manual (Page 24)

Item Description
- 20 -
utility or other manufacturers’, such as Funk,
Odyssey client utility.
Disable ：Left this item unchecked to use the utility we
provide.XP’s built-in utility
Status Displays the information about the status of the
communication.
SSID The SSID is the unique name shared among all
points in your wireless network.
The name must be identical for all devices and
points attempting to connect to the same network.
No WEP key
With WEP key
For TI-Based WLAN devices
For TI-Based WLAN devices with WEP key
Mode Displays the type of Basic Service Set, Access Point
or Peer to Peer.
Ch Displays the channel that is currently in use.
Signal Displays the signal strength of the connection
between the Wireless Network Adapter and the Access
Point it connects to.
BBS ID A set of wireless stations is referred to as a Basic Service
Set (BSS). Computers in a BSS must be configured with
the same BSS ID.
Current Configuration
Pref. SSID It shows the current SSID setting of the
Wireless Network Adapter.
BSS Type Displays the type of Basic Service Set,
Access Point or Peer to Peer.
Channel Shows the selected channel that is currently
used. (There are 14 channels available,
depends on the country.)
Tx Rate Shows the current transfer rate.
Signal Quality Displays the signal strength of the connection
between the Wireless Network Adapter and
the Access Point it connects.