ZyXEL Communications ES-315 - Manual (Page 28)

Chapter 2 Hardware Overview
ES-315/ES-315-F User’s Guide
28
The following table describes the Switch’s LEDs.
2.2 Rear and Base Panels
The following figures show the rear panels of the ES-315 and ES-315-F, and the base panel of
the ES-315-F.
Figure 5 Rear Panel: ES-315
Figure 6 Rear Panel: ES-315-F
Table 1 LED Descriptions
LED STATUS DESCRIPTION
PWR/
SYS
On Green The Switch is receiving power.
Off The Switch is not receiving power.
ALM On Red The Switch is malfunctioning.
Off The Switch is functioning normally, or is not receiving power.
LAN1 ~
LAN4
On Steady The Switch has a successful Ethernet connection on the respective
LAN port.
Blinking The Switch is sending or receiving data on the respective LAN port.
Off There is no device connected to the respective LAN port.
WAN On Steady The Switch has a successful connection on the WAN port.
Blinking The Switch is sending or receiving data on the WAN port.
Off There is no device connected to the WAN port.