ZyXEL Communications ES-315 User Manual
Page 62
Chapter 7 VLAN
ES-315/ES-315-F User’s Guide
62
Acceptable
Frame Type
Specify the type of frames allowed on a port. Choices are All, Tag Only and Untag
Only.
Select All from the drop-down list box to accept all untagged or tagged frames on
this port. This is the default setting.
Select Tag Only to accept only tagged frames on this port. All untagged frames will
be dropped.
Select Untag Only to accept only untagged frames on this port. All tagged frames
will be dropped.
Apply
Click Apply to save your changes to the Switch’s run-time memory. The Switch
loses these changes if it is turned off or loses power, so use the Save link on the
top navigation panel to save your changes to the non-volatile memory when you
are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 15 Advanced Application > VLAN > VLAN Port Setting (continued)
LABEL
DESCRIPTION