Xantrex Technology PROwatt 600 - Manual (Page 29)

Connecting DC Cables
14
7. Before proceeding, make sure that the cable you have just
installed connects the negative terminal of the inverter to
the negative terminal of the battery.
8. Connect the cable from the positive (red) terminal of the
PROwatt 600 to the positive terminal of the battery.
This is the last cable connection. A spark is normal when
you make it.
9. If you have installed a battery selector switch, use it to
select one of the batteries.
10. Turn on the inverter’s On/Off switch.
11. Check the inverter’s front panel. The POWER indicator
should be on. If it is not, or if the FAULT indicator is on,
check your battery and the connections to the inverter.
WARNING: Explosion or Fire
Do not complete the next step if flammable fumes
are present. Explosion or fire may result.
Thoroughly ventilate the battery compartment
before making this connection.