ZyXEL Communications PRESTIGE 2602HW - Manual (Page 19)

Prestige 2602HW Series Quick Start Guide
19
Click Logout in the navigation panel when you have finished a Prestige
management session.
Figure 6 Web Configurator: Site Map Screen
The Prestige automatically logs you out if the management
session is idle for five minutes. Log back in if this happens.
5.2 Common Screen Command Buttons
This table shows common command buttons found on many web configurator screens.
Back Click Back to return to the previous screen.
Apply Click Apply to save your changes back to the Prestige.
Reset/Cancel Click Reset or Cancel to begin configuring this screen afresh.
5.3 Using the Wizard for Initial Configuration
Use the Wizard Setup screens to configure the Prestige’s Internet access and VoIP
settings with information from 1.1 Required Information. Your ISP may have already
configured some of the fields in the wizard screens for you.
1. In the Site Map screen, click Wizard Setup to display the first wizard screen.
WIZARD
Navigation panel
LOGOUT