ZyXEL Communications PRESTIGE 2602HW - Manual (Page 35)

Prestige 2602HW Series Quick Start Guide
35
6.7 Enabling the Firewall with Default Policy
From the main screen, click Firewall and then Default Policy to display the following
screen. Activate the firewall by selecting the Firewall Enabled check box as seen in the
following screen.
Figure 21 Default Policy
The following table describes the labels in this screen.
Table 6 Firewall: Default Policy
LABEL DESCRIPTION
Firewall
Enabled Select this check box to activate the firewall. The Prestige performs
access control and protects against Denial of Service (DoS) attacks
when the firewall is activated.
Allow
Asymmetrical
Route Select this check box to have the Prestige firewall permit the use of
triangle route topology on the network. See the appendix for more on
triangle route topology.