ZyXEL Communications PRESTIGE 2602HW - Manual (Page 7)

Prestige 2602HW Series Quick Start Guide
7
Table 1 Rear Panel Description
LABEL DESCRIPTION
CONSOLE Only connect this port if you want to configure the Prestige using the
SMT via console port see your User's Guide for details.
Use the console port for local device configuration and management.
Connect one end of the console cable to the console port of the
Prestige and the other end to a serial port (COM1, COM2 or other
COM port) on your computer. Your computer should have a terminal
emulation communications program (such as HyperTerminal) set to
VT100 terminal emulation, no parity, 8 data bits, 1 stop bit, no flow
control and 9600 bps port speed.
RESET You only need to use this button if you’ve forgotten the Prestige’s
password. It returns the Prestige to the factory defaults (password is
1234, LAN IP address 192.168.1.1 etc.; see your User’s Guide for
details).
2.3 Prestige 2602HWL
Use both VoIP and regular phone services with the Prestige 2602HWL’s lifeline feature.
Make and receive regular phone calls while someone else connected to the Prestige is
making VoIP calls.