ZyXEL Communications PRESTIGE 2602HW - Manual (Page 25)

Prestige 2602HW Series Quick Start Guide
25
Figure 14 Wizard: LAN Configuration
Enter the IP address of your Prestige
in dotted decimal notation in the LAN
IP Address field. For example,
192.168.1.1 (factory default).
If you change the
Prestige’s LAN IP
address, you must
use the new IP
address if you want to
access the web
configurator again.
Enter a subnet mask in dotted decimal
notation in the LAN Subnet Mask
field.
From the DHCP Server drop-down list box, select On to allow your Prestige to assign IP
addresses, an IP default gateway and DNS servers to computer systems that support the
DHCP client. Select Off to disable DHCP server.
When DHCP server is used, set the following items:
Specify the first of the contiguous addresses in the IP address pool in the Client IP Pool
Starting Address field.
Specify the size or count of the IP address pool in the Size of Client IP Pool field.
Enter the IP address(es) of the DNS server(s) in the Primary DNS Server and/or
Secondary DNS Server fields.
6. The Prestige automatically tests the connection to the computer(s) connected to the
LAN ports. To test the connection from the Prestige to the ISP and the registrations
of your SIP account, click Start Diagnose. Otherwise click Return to Main
Menu to go back to the Site Map screen.