X10 Wireless Technology VK84A - Manual (Page 10)

18 19
Camera should be installed into the base of the dome after knocking out the
holes, knock out 3 holes for mounting on a ceiling or 1 hole for the wall
mounting bracket:
Mounting the camera on a ceiling
1. Knock out the three holes on the base
of the dome using a screwdriver and
hammer.
2. Insert the white rubber plugs into the
knockout holes on the inside of the
base.
3. Attach the black rubber washers on
the outside of the base.
4. Attach the camera to the base of
the dome using the brass screw on
the outside of the dome’s base.
5. Plug the power and video
cables into the camera.
Mounting the Camera, cont. Mounting the Camera, cont.
6. Remove the lens cap.
(Don’t touch the lens).
7. Attach the base of the dome to a
ceiling by inserting three screws
into the knockout holes on the
inside of the base.
8. Point the pip on the camera’s
antenna in the direction of the TV
that you connected the receiver
to (if you’re using the wireless
feature).
9. Attach the clear dome cover to
the base of the dome, using the 5
screws provided.