X10 Wireless Technology VK84A - Manual (Page 17)

32 33
Lens Settings
These settings control how the lens in the SentinelPro Camera behaves
during normal use.
· Digital ZOOM: The camera uses digital zoom (10X) after reaching the
maximum optical zoom level (22X). Digital zoom produces a slightly
less clear picture than optical, and can be turned off.
· ZOOM Speed: Controls how quickly the camera zooms in.
· ZOOM Type: Choose WIDE or TELE.
· Focus Speed: Controls how quickly the camera focuses.
· Focus: Choose between Auto (automatic continuous) and Manual
focus (the default setting). If using Manual Focus you can select a long
focal length (INF, or infi nite) to allow the camera to focus on objects
any distance away, or a short focal length (NEAR) if you are using
the camera only to view objects relatively close. In Manual mode the
camera will set focus automatically after a zoom in or out. If you select
Auto, you can use the automatic continuous setting until you zoom in or
out, at which point the camera sets back to Manual.
Advanced Onscreen Menu Options Advanced Onscreen Menu Options
Automatic Picture Control
Automatic Picture Control (APC) changes the geometry of the picture
produced by the camera. These changes are slight and it can be hard to
notice how the picture is different.
· H-GAIN: The Horizontal Gain setting adjusts the horizontal (left to
right) line of the picture.
· V-GAIN: The Vertical Gain setting adjusts the vertical line of the
picture.