ZyXEL Communications GS-2750 - Manual (Page 239)

Chapter 29 DHCP
GS-2750 User’s Guide
239
Figure 127 IP Application > DHCP > VLAN
The following table describes the labels in this screen.
Table 92 IP Application > DHCP > VLAN
LABEL DESCRIPTION
VID Enter the ID number of the VLAN to which these DHCP settings apply.
DHCP Status Select whether the Switch should function as a DHCP Server or Relay for the
specified VID. If you select Server then fields related to DHCP relay configuration are
grayed out and vice versa.
Server Use this section if you want to configure the Switch to function as a DHCP server for
this VLAN.
Client IP
Pool
Starting
Address
Specify the first of the contiguous addresses in the IP address pool.
Size of
Client IP
Pool
Specify the size, or count of the IP address pool. The Switch can issue from 1 to 253
IP addresses to DHCP clients.
IP Subnet
Mask
Enter the subnet mask for the client IP pool.
Default
Gateway
Enter the IP address of the default gateway device.