Zenith L20V54S - Manual (Page 19)

Installer Remote Control Key Functions
P A G E 1 9
A brief list of the keys on the optional installer’s remote and what they do.
MUTE
Turns sound Off and On, while the picture
remains.
GUIDE
Use to view DTV program information.
CC
Press to activate English subtitles.
INFO
Press to display current program information.
ALARM
Use to go to the Alarm menu. Set a time
for the TV to turn itself on.
POWER
Turns TV On or Off.
BANK
Press and repeat to select a Channel
Memory Bank - - 1, 2, 3, or 4 (Standby).
SAP
Selects MTS sound: Mono, Stereo, and SAP
in analog mode. Change the audio
language in DTV mode.
[-] BUTTON
When selecting a digital broadcast
channel, key in the Main channel
number followed by the-> [-] -> then the
sub channel number. Analog channels do
not contain a sub channel number.
TIMER
Press repeatedly to select a preset time to
automatically shut the TV off.
MENU
Press to display the main on-screen menu.
VOLUME / CHANNEL / OK (Enter)
Increase or decrease the volume / Change
channels.
Select on-screen menu items and change
menu values.
NUMBER BUTTONS
Use for direct channel entry.
ADJ D / E , F / G
User ADJ (adjust) Up/Down menu arrows,
Left/Right to change the selected option.
BED 1/BED 2 (*See Note Below)
Determines the code set transmitted, Bed 1
or Bed 2. Switch setting must correspond to
item 27, HOSPITAL MODE setting in the TV’s
Installer Menu.
CHANNEL PREVIEW
Displays available TV channels, and (if
active) the Guest Parental Control menu:
set V-Chip blocks to restrict both analog
and digital programming.
• Aux Channel allows the guest to select
the Audio / Video inputs. (Use the A/V
jacks on the back of the TV as a source).
FLASHBK (FLASHBACK)
Use to return to the last channel viewed.
*Note: Bed 1 - Bed 2 switch on patient remote. The position of the Bed 1 - Bed 2 switch must correspond to the setting in the
Installer’s menu. The switch above can be set by sliding it to the Bed 1 or Bed 2 position. On the patient’s remote, the Bed 1 or
Bed 2 position can be selected by using a paper clip or a ball-point pen to slide the switch to the correct position.
Left position = Bed 1.
Right Position = Bed 2.
Optional Installer
Remote Control
Part Number
3140OSKZ003AR6