Installer menu – Zenith L20V54S User Manual
Page 46
Installer Menu
P A G E 4 6
Menu Item
Function
Value Range
Default Value
Brief Description of Function and Comments
035
COMPPORT EN.
0 / 1
1
Set to 1 to enable HDMI. Set to 0 to disable.
039
REAR AUX EN
0 / 1
1
Set to 1 to enable display panel Video 1 input jack.
046
STRT AUX SRCE
1 ~ 7, 255
255
Sets the starting AUX source.
047
AUX STATUS
0 / 1
0
Set to 1 for M.P.I. AUX source to be reported as a channel number instead of Channel 0.
053
DIS. CH-TIME
0 / 1
0
Set to 1 to disable Channel-Time display.
069
EN. CH-T COL.
0 / 1
1
Set to 1 to enable custom color for the Channel-Time display.
070
FOR. CH-TIME
0 ~ 7
1
Chooses custom foreground color for the Channel-Time display.
071
BCK. CH-TIME
0 ~ 7
1
Chooses custom background color for the Channel-Time display.
073
CH NOT AVBLE
0 / 1
0
If set to 1 and channel override is 0, “NOT AVAILABLE” message is displayed
when directly accessing a channel not in the favorite channel list.
075
REVERT CH
0 / 1
0
If set to 1 and loss of M.P.I. communication occurs, TV tunes to Start Channel.
077
QUICK SHUTOFF
0~17
0
Allows TV timed power off press and hold setup with pillow speaker channel button.
078
UPN MSB
0 ~ 255
255
User programmable number, most significant byte.
079
UPN MSB-1
0 ~ 255
255
User programmable number, most significant byte - 1.
080
UPN MSB-2
0 ~ 255
255
User programmable number, most significant byte - 2.
081
UPN LSB
0 ~ 255
255
User programmable number, least significant byte.
082
CHKSM ERROR
0 / 1
0
Enforces rigid M.P.I. checksum.
083
HANDSHK TIME
0 ~ 5
5
Relaxes M.P.I. timing to be compatible with PC based Windows-controlled systems.
084
PERMANENT BLK
0 / 1
0
Removes block hours setting for Parental Control and makes block permanent.
088
EN NOISE MUTE
0 / 1
1
If set to 1, mutes audio if no signal is present.
090
KEY LOCK
0 / 1
0
If set to 1, keyboard is locked out, IR is still functional.
094
SAP MENU EN
0 / 1
1
Set to 0 to disable feature on Function menu. Set to 1 to enable feature on Function menu.
096
DEF. ASP. RATIO
0, 1, 2, 4, 5
2
Sets default aspect ratio at power up. See detailed descriptions and item 106.
102
ATSC BAND
0 ~ 4
4
Selects ATSC band.
103
ATSC TUNE MODE
0 / 1
1
Sets ATSC tuning mode. Set to 0 for virtual channels, set to 1 for physical channels.
104
START MINOR CH
0 ~ 255
0
Selects Minor start channel. Set 0 for NTSC. Not 0, sets Minor channel number.
106
ASP RATIO LOCK
0 / 1
0
To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle.
107 BANNER
SELECT
N/A
N/A
Not
applicable.
116
VIDEO MUTE EN
0 / 1
0
Set to 0 for normal, set to 1 for Blank.
117
FACT DEFAULT
0 / 1
0
0=Normal. 1=Loads factory default presets of all above settings.
Installer Menu Items 035 through 117