ZyXEL Communications P-2302R-P1 - Manual (Page 68)

P2302R-P1 Support Notes
All contents Copyright

2007 ZyXEL Communications Corporation.
68
Note: You should have a voice account already set up and have VoIP information from your VoIP service
provider prior to configure SIP account on to the unit.
With the account information your ITSP provided now you may start.
Step 1. Open the web browser from your workstation to connect to the ZyXEL Device by entering the
Management IP address of the ZyXEL Device (LAN IP address). The default management IP of The ZyXEL
Device is 192.168.1.1.
Step 2. Enter the administrator password (The default is '1234') on the login page and click on login.
Step 3. Click VoIP/SIP on the tree menu to bring you to SIP setting page. In the SIP Settings page, use the
account selector on right upper corner of the page to select the SIP account you will like to configure.
Step 4. Check Active Sip Account if you would like to activate this account. After that, fill in the account
information provided by ITSP. Normally that includes SIP number, SIP local port, SIP server address, SIP
server port, Register server port, Register server address, SIP service domain.
Step 5. Fill in the User ID and password provided by ITSP in the Authentication session.
Step 6. Check Caller ID box if you wish to send caller ID.