ZyXEL Communications P-2302R-P1 - Manual (Page 78)

P2302R-P1 Support Notes
All contents Copyright

2007 ZyXEL Communications Corporation.
78
Phone port settings
The ZyXEL Device allows you to configure the volume and echo cancellation setting for each individual phone
port.
To configure the phone port setting, please follow the below steps:
Step 1. Open the web browser on your workstation and connect to the ZyXEL device by entering the
management IP address of the ZyXEL device. The default management IP of the ZyXEL device is 192.168.1.1.
Step 2. Enter the administrator password on the page of login and click on login. The default is '1234'
Step 3. Select VoIP / Phone in the tree menu to navigate you to the Phone setting page.
Step 4. Select the phone port you wish to configure by using the phone port selector located on top right of the
phone port configuration page.
Step 5. Change the phone port parameter as desired and click Apply when you finish configuration and want to
apply the settings. To configure the 2nd phone port, use the phone port selector and select phone2 and follow
the steps 1 to 5 to complete the 2nd phone port setup.
Each field's detail description is listed below.