ZyXEL Communications P-2302R-P1 - Manual (Page 98)

P2302R-P1 Support Notes
All contents Copyright

2007 ZyXEL Communications Corporation.
98
Step 2. Enter the administrator password appear on the page of login and click on login. The default is '1234'
Step 3. On the left column click on PHONEBOOK to bring you to Speed Dial page to enter phone book
configuration page.
Step 4. Select the entry number you wish to add the to the phone book by the entry selector located under add
new entry category on the speed dial field.
Step 5. Fill in the SIP number of the remote party and a descriptive name and click on the radio button to select
either to use proxy or entering static IP or URL remote peer.
Step 6. Click on Add button when you are finish to add the entry to the phone book.
Each field's detail description of the page is listed below.
Label Description
Add New
Entry
Use this section of the screen to edit and save new or existing speed dial
phone book entries.
Speed Dial Select a speed dial key combination from the drop-down list box.
SIP Number Enter the SIP number of the party that you will call (use the number or text
that comes before the @ symbol in a full SIP URI). You can use up to 127
ASCII characters.
Name Enter a descriptive name to identify the party that you will use this entry to
call. You can use up to 127 ASCII characters.
Type Select Use Proxy if calls to this party use your SIP account configured in the
VoIP screen.
Select Non-Proxy (Use IP or URL) if calls to this party use a different SIP
server or go directly to the callee’s VoIP phone (IP-to-IP). Enter the SIP
server’s or the party’s IP address or domain name (up to 127 ASCII
Extended set characters).
Add
Click this button to save the entry in the speed dial phone book. The speed
dial entry displays in the Speed Dial Phone Book section of the screen.
Speed Dial
Phone Book
This section of the screen displays the currently saved speed dial entries.
You can configure up to 10 entries and use them to make calls.