Zebra Technologies XiIIIPlus - Manual (Page 24)

O-18 UMAN-CM2/3
Bluetooth™ Wireless Communications
“Bluetooth” is a worldwide standard for the exchange of
data between two devices via radio frequencies.
Bluetooth radios are relatively low powered to help pre-
vent interference with other devices running at similar
radio frequencies. This limits the range of a Bluetooth
device to about 10 meters (about 32 feet).
Exposure to Radio Frequency Radiation
The radiated output power of this internal wireless radio is
far below the FCC radio frequency exposure limits. Never-
theless, this Bluetooth radio must be used in such a man-
ner that the antenna is 2.5 cm or further from the human
body.
The radio and antenna are mounted internally in this
printer in such a way that, when the printer is used in a
standard configuration (belt clip, soft case, shoulder
strap), the 2.5 cm distance from the users body will be
met. Do not use the printer in an unauthorized manner.
The internal wireless radio operates within guidelines
found in radio frequency safety standards and recom-
mendations. The level of energy emitted is far less than the
electromagnetic energy emitted by wireless devices such
as mobile phones.
In order to exchange data, two Bluetooth enabled
devices must establish a connection. Bluetooth software
is always running in the background, ready to respond to
connection requests. One device (known as the
master
or the client) must request a connection with another.
The second device (the slave or the server ) then accepts
or rejects the connection. A Bluetooth enabled Cameo
will always act as a slave device. The miniature network
created by this connection is sometimes referred to as a
“piconet” and in theory can consist of several Bluetooth
enabled devices.
Each Bluetooth Cameo has a unique Bluetooth Device
Address (BDA) loaded into its radio module when manu-
factured.