ZyXEL Communications NSA210 - Manual (Page 142)

Chapter 6 System Setting
NSA210 User’s Guide
142
Manual Select this radio button to enter the time and date manually.
When you enter the time settings manually, the NSA uses the
new setting once you click Apply.
Note: If you enter time settings manually, they revert to their
defaults when power is lost.
New Date (yyyy-
mm-dd)
This field displays the last updated date from the time server or
the last date configured manually.
When you set Time and Date Setup to Manual, enter the new
date in this field and then click Apply.
New Time
(hh:mm:ss)
This field displays the last updated time from the time server or
the last time configured manually.
When you set Time and Date Setup to Manual, enter the new
time in this field and then click Apply.
Get from Time Server Select this check box to have the NSA get the time and date
from the time server you select in the Time Server Address
field.
Time Server
Address
Select a time server from the drop-down list box or select
Specify my own time server and enter the time server you
wish to use in the field below. Check with your ISP/network
administrator if you are unsure of this information.
Synchronize Now Click this for the NSA to retrieve the correct time from the
configured time server right away.
Time Zone
Time Zone
Choose the time zone of your location. This will set the time
difference between your time zone and Greenwich Mean Time
(GMT).
Enable Daylight Saving Daylight saving is a period from late spring to early fall when
many countries set their clocks ahead of normal local time by
one hour to give more daytime light in the evening.
Select this option if you use Daylight Saving Time.
Start Date Configure the day and time when Daylight Saving Time starts if
you selected Enable Daylight Saving. The hour field uses the
24 hour format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States
on the second Sunday of March. Each time zone in the United
States starts using Daylight Saving Time at 2 A.M. local time. So
in the United States you would use March, Second, Sunday, at
2:00.
Daylight Saving Time starts in the European Union on the last
Sunday of March. All of the time zones in the European Union
start using Daylight Saving Time at the same moment (1 A.M.
GMT or UTC). So in the European Union you would select
March, Last, Sunday. The time you specify depends on your
time zone. In Germany for instance, you would type 2 because
Germany's time zone is one hour ahead of GMT or UTC
(GMT+1).
Table 18 System Setting > Date/Time (continued)
LABEL DESCRIPTION