4 syslog server setting – ZyXEL Communications NSA210 User Manual
Page 313
Chapter 15 Maintenance Screens
NSA210 User’s Guide
313
15.4.4 Syslog Server Setting
You can enable the syslog server and select the categories to include in the log
report. In the Report Config screen, click the Syslog Server Setting tab to
open the following screen.
Figure 148 Maintenance > Log > Report Config: Syslog Server Setting
The following table describes the labels in this screen.
Table 100 Maintenance > Log > Report Config: Syslog Server Setting
LABEL
DESCRIPTION
Enable Syslog
Server
Check this to enable syslog server.
Server Address Enter the syslog server address you want the NSA to use for its log
alerts.
In the table below, check the type of log alerts you want to receive in your e-mail. Select
All Log to include all types of log alerts.
Apply
Click this to save your changes.
Cancel
Click this to return to the previous screen without saving.