ZyXEL Communications NSA210 - Manual (Page 194)

Chapter 9 Applications
NSA210 User’s Guide
194
9.9 The Print Server Screen
Use the Print Server screen to view and manage the NSA’s list of printers and
print jobs.
Click Applications > Print Server to open the following screen.
Figure 68 Applications > Print Server
The following table describes the labels in this screen.
Apply Click this to save your changes.
Cancel Click this to return to the previous screen without saving.
Table 38 Applications > Broadcatching > Edit Channel
LABEL DESCRIPTION
Table 39 Applications > Print Server
LABEL DESCRIPTION
Refresh Click this to update the list of printers and print jobs.
The table lists printers and their queued print jobs. Click a column’s
heading to sort the entries by that criteria.
Status This fields shows whether the printer is connected and turned on (on-
line) or not (off-line).
Name This identifies the printer. Each printer connected to the NSA must
use a unique name.
Actions Rename: Click this to change the name the NSA uses for the printer.
Cancel Job: Click this to remove all print jobs from the NSA queue
for a particular printer. However, since the NSA sends print jobs to
the printer as soon as it can, this button may only have an effect if
there are very large or many print jobs in the queue. To stop a print
job that has already started, you may have to turn off the printer.
Delete: Click this to remove a printer from the NSA’s printer list. To
add the printer back into the list, disconnect the printer from the
NSA’s USB port and reconnect it. If that does not work, disconnect
the USB port and turn off the printer’s power. Then reconnect the
printer and turn it back on.