ZyXEL Communications ES-3124PWR - Manual (Page 215)

Dimension ES-3124PWR Ethernet Switch
Introducing the Commands 29-21
Table 29-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
mibtrap Enables sending of PoE MIB traps.
29.9.4 config-vlan Commands
The following table lists the config-vlan commands in configuration mode.
Table 29-4 Command Summary: config-vlan Commands
COMMAND DESCRIPTION
vlan <1-4094> Creates a new VLAN group.
name <name-str> Specifies a name for identification
purposes.
normal <port-list> Specifies the port(s) to dynamically join
this VLAN group using GVRP
fixed <port-list> Specifies the port(s) to be a permanent
member of this VLAN group.
forbidden <port-
list>
Specifies the port(s) you want to prohibit
from joining this VLAN group.
untagged <port-
list>
Specifies the port(s) you don’t want to
tag all outgoing frames transmitted with
this VLAN Group ID.
inactive Disables the specified VLAN.
help Displays a list of available VLAN
commands.
no fixed <port-
list> Sets fixed port(s) to normal port(s).
forbidden <port-
list>
Sets forbidden port(s) to normal port(s).
untagged <port-
list>
Specifies the port(s) you want to tag all
outgoing frames transmitted with this
VLAN Group ID.
inactive Enables the specified VLAN.
ip address
inband-default
dhcp-bootp
Sets the default in-band interface to use
a static IP address in this VLAN.
The switch will use the default IP
address of 0.0.0.0 if you do not
configure a static IP address.
ip address
default-gateway
Deletes the default gateway from this
VLAN.
ip address <ip-
address> <mask> Deletes the IP address and subnet
mask from this VLAN.
exit Leaves config-vlan mode.