ZyXEL Communications ES-3124PWR - Manual (Page 225)

Dimension ES-3124PWR Ethernet Switch
Command Examples 30-5
ping <ip> < [in-band|out-of-band|vlan <vlan-id> ] [ size <0-8024> ] [ -
t ]>
where
<ip>
= The IP address of an Ethernet device.
[in-band|out-of-
band|vlan <vlan-
id> ]
= Specifies the network interface or the VLAN ID to which the Ethernet
device belongs.
out-of-band refers the management port while in-band means the
other ports on the switch.
[ size <0-
8024> ]
= Specifies the packet size to send.
[ -t ] = Sends Ping packets to the Ethernet device indefinitely. Click [CTRL]+
C to terminate the Ping process.
This command sends Ping packets to an Ethernet device. The following example sends Ping requests to and
displays the replies from an Ethernet device with an IP address of 192.168.1.100.
Figure 30-7 ping Command Example
30.4 traceroute
Syntax:
traceroute <ip> [in-band|out-of-band|vlan <vlan-id>][ttl <1-255>] [wait
<1-60>] [queries <1-10>]
where
<ip> = The IP address of an Ethernet device.
[in-band|out-of-
band|vlan <vlan-
id> ]
= Specifies the network interface or the VLAN ID to which the Ethernet
device belongs.
[ttl <1-255>] = Specifies the Time To Live (TTL) period.
[wait <1-60>] = Specifies the time period to wait.
[quesries <1-
10>]
= Specifies how many tries the switch performs the traceroute function.
This command displays information about the route to an Ethernet device. The following example displays route
information to an Ethernet device with an IP address of 192.168.1.100.
ras# ping 192.168.1.100
sent rcvd rate rtt avg mdev max min reply from
1 1 100 0 0 0 0 0 192.168.1.100
2 2 100 0 0 0 0 0 192.168.1.100
3 3 100 0 0 0 0 0 192.168.1.100
ras#