ZyXEL Communications ES-3124PWR - Manual (Page 224)

Dimension ES-3124PWR Ethernet Switch
30-4 Command Examples
Figure 30-5 show interface Command Example
30.2.6 show mac address-table
Syntax:
show mac address-table <all <sort>|static>
Where
<sort> = Specifies the sorting criteria (MAC, VID or port).
This command displays the MAC address(es) stored in the switch. The following example shows a static MAC
address table.
Figure 30-6 show mac address-table Command Example
30.3 ping
Syntax:
ras# show mac address-table static
Vid Mac Port Status
1 01:a0:c5:aa:aa:aa 1 Permanent
ras#
ras# show interface 12
Port Info Port NO. :12
Link :100M/F
Status :FORWARDING
LACP :Disabled
TxPkts :3731
RxPkts :46991
Errors :0
Tx KBs/s :0.384
Rx KBs/s :0.674
Up Time :3:11:39
TX Packet Tx Packets :3731
Multicast :0
Broadcast :4
Pause :0
Tagged :0
RX Packet Rx Packets :46991
Multicast :15889
Broadcast :27831
Pause :0
Control :0
TX Collison Single :0
Multiple :0
Excessive :0
Late :0
Error Packet RX CRC :0
Length :0
Runt :0
Distribution 64 :11746
65 to 127 :20085
128 to 255 :17153
256 to 511 :877
512 to 1023 :388
1024 to 1518 :566
Giant :0
ras#