ZyXEL Communications ISDN Terminal Adapter Omni.Net Lite - Manual (Page 25)

Omni.Net Lite User’s Guide
Chapter 2 Using the Utility 24
C
H A P T E R
2
Using the Utility
This chapter shows you how to access and configure the TA using the utility.
2.1 Accessing the TA with the Utility
1 Make sure your TA hardware is properly connected (refer to the Quick Start Guide).
2 Insert the included CD into your CD-ROM driver.
3 Double-click the ConfigOmniNetLite.exe icon, as shown below, in the Utility folder of
your CD.
4 You will see the screen as shown below. Select Local TA and click Next to access the
TA through the data port. Otherwise, select Remote TA, enter the phone number and
click Next to access the remote TA via an ISDN network.
5 Select Query from TA and click Next to display the current settings on the TA. Select
Read from file and click Next to open a previously saved configuration file (.CFG) on