ZyXEL Communications ISDN Terminal Adapter Omni.Net Lite - Manual (Page 63)

Omni.Net Lite User’s Guide
Chapter 3 Using AT Commands 62
3.4.1 Phone Number Assignment
Enter AT!pS=<phone number> and press [ENTER] to assign the first phone number to
the PHONE 1 port.
Enter AT!pS=<phone number> and press [ENTER] to assign the second phone number to
the PHONE 2 port.
Figure 19 AT Command Example 1
3.4.2 Storing Phone Number
To store a phone number (1234567 for example) on the TA, use the AT-Zd=<phone
number> [/<sub-address>] command for data calls and the AT\Zd=<phone
number> [/<sub-address>] command for voice calls.