ZyXEL Communications ISDN Terminal Adapter Omni.Net Lite - Manual (Page 43)

Omni.Net Lite User’s Guide
Chapter 2 Using the Utility 42
Figure 16 RS-232 Port: Advance Setting
The following table describes the labels in this screen.
Table 8 RS-232 Port: Advance Setting
LABEL DESCRIPTION
Advance Options
Auto Answer Set how many ringing messages the TA receives before it answers a data call
automatically.
Enter 0 to stop the TA answering a data call automatically. When there is an
incoming data call, you can press the push button on the top panel (see the
Quick Start Guide) or use the ATA command to answer it manually.
Wait for Conn Enter the number of seconds for the TA to wait for an answer to the data call
before dropping it.
Power on baud rate Configure the initial baud rate after power-on.
Power on attribute Configure the initial attribute of the data port after power-on.
Extended result code Select extended result code to show the extended command response or the
connect message to the DTE (see Table 20 on page 66 ). Otherwise, select
basic result code (default).
Ring result code Select the information you want to display for the incoming calls. Options are
no extended information (default), display calling phone number, display
user data, display calling phone number and user data and RVS-COM
format.
Charge Information