Zhone Technologies IMACS Network Device User Manual

Page 24

Advertising
background image

Zhone Technologies, Inc.

IMACS Product Book, Version 4

March 2001

Page 20

Model 8905 Power Supply, 120/240 VAC

Input Voltage

90 Vrms to 260 Vrms

Input Frequency

50/60 Hz

Output Power

100W max

Output Voltage

-48.0 VDC

Output Current

2 amp

Maximum Number per system

2

Redundancy

Optional

Ventilation

Convection cooled

Approvals

UL 1459, UL 1950, CSA-C22.2 No.950, CE Mark

Model 8908 Power Supply, 105/240 VAC

Input Voltage

90 Vrms to 260 Vrms

Input Frequency

50/60 Hz

Output Power

300 W max

Output Voltage

-48.0 VDC

Output Current

6.25 amp

Maximum Number per system

2

Redundancy

Optional

Ventilation

Forced Air, (120mm Fan)

Approvals

UL 1459, UL 1950, CSA-C22.2 No.950


Ring Generator

Ring generators are required to supply ringing current whenever there are Foreign Exchange Station (FXS) Cards
operating in the unit or if there is one or more Foreign Exchange Office (FXO) ports that are used in Manual Ring
Down (MRD) mode.

The current ring generator model is: Model 890620

Model 890620,the internal ring generators, will support up to 24 simultaneously ringing phones. Additional ringers
can be added depending on the chassis and application, (see table 5). The exact number of simultaneously ringing
subscriber lines supported is a function of the Bell Ringer Equivalency Number (REN) of the attached devices and
the loop impedance. The user may attach an external ring generator to the IMACS terminal block location marked
RGR.

The model 890620 is an enhanced version of the current 8906 ring generator. This model has improved operating
efficiency and inrush current limiting.
Table —Ring Generator Specifications

Model 890620 Ringing Generator

Input Voltage

42 to 57 VDC, linear = 0.84 max.

Efficiency

57% at 48 V and 1 kOhm load

Protection

5 A slow blow fuse, primary current limiting

Noise

Less than 32dBrnc

Output Voltage

100 VDC rms default – adjustable from 60 to 105 Vrms

Output Current

160 mA RMS continuous, 230 mA RMS cadence

Output Frequency

20 Hz +/- 1 Hz

Operational Modes

Strap selectable: Master or Slave

Maximum Number per system

IMACS 600

IMACS 800

IMACS 900

1
1 Master, 3 slaves (DC operation)
2 slaves (AC operation)
1 Master, 1 slave

Redundancy

There is no provision for Master Ringer redundancy, however
the slave units provide fail-over protection

Advertising