Xerox 701P21091 - Manual (Page 145)

Specifying input parameters
Using LCDS Print Description Language 2-37
Options
Default 0
RECORD CONSTANT
Specifies a constant string used to signal the end of a record.
This record delimiter constant string signals the end of the
record, but it is not included in the print line.
Syntax RECORD CONSTANT = sc
Options
Default No default
RECORD FORMAT
Specifies the format of the record length field.
Syntax RECORD FORMAT = type
Table 2-38. RECORD ADJUST parameter options and definitions
Option Definition
value A constant integer that is added to or subtracted from the value in the length
field of every record. The range of a value is -127 to 127 and must be no
greater than the record length. The first character may be plus (+) or minus (-).
Table 2-39. RECORD CONSTANT parameter options and definitions
Option Definition
sc String constant.
Specifies a string (hexadecimal, octal, or alpha) constant as described in the
chapter “Creating a job source library (JSL).” The length of the constant may be
from 1 to 4 bytes.