Xerox 701P21091 - Manual (Page 455)

PDL command quick reference
Using LCDS Print Description Language B-9
RSTACK RSTACK ACCTINFO = (offset, length) —
RSTACK DELIMITER = {YES | NO} NO
RSTACK HRPTNA = {(offset, length) | NONE} NONE
RSTACK PRINT = {BIN | BOTH | TRAY | NONE} NONE
RSTACK TEST = testexp —
RSUSPEND RSUSPEND BEGIN = {CURRENT | NEXT} NEXT
RSUSPEND TEST = testexp —
SAVE (DJDE
only) SAVE = {(filename [, ...]) | ALL} —
ac:SEFFNT [label:] SEFFNT SEFMAP = ((font
1
, font
2
,),[(font
m
, font
n
)]) —
SEFFNT MAP = filename —
ac:STOCKSET ac:STOCKSET ASSIGN = {stockdescriptor | (stockdescriptor
1
[,stockdescriptor
2
] [, ...])}
—
ac:STOCKSET INIFEED = {‘stockname’ | stockreference} first ‘stockname’
ac:STOCKSET SYSPAGE = {‘stockname’ | stockreference |
MAIN | AUX} —
ac:SYSTEM SYSTEM JDL = JDLname —
ac:TABLE ac:TABLE CONSTANT = (sc
1
[, sc
2
] [, ...]) —
ac:TABLE MASK = (ignore chart ([,charspeci
1
[, charspeci
2
]
[,...]]))
—
ac:TCODE ac:TCODE DEFAULT = tcodetype —
ac:TCODE TASSIGN = (typespec, {’inputspec’
1
| (’inputspec’
2
[,...]})
—
ac:TCODE TRESET = (typespec, {’inputspec’ | (’inputspec’
1
[,...]) | ALL})
—
ac:VFU VFU ASSIGN = {(channo, lineno) | channo, lineno [, lineno][,...])} —
VFU BOF = value 66
VFU TOF = value 1
Table B-2. PDL command quick reference table (Continued)
Command Syntax Default