Yamaha CRW2200SX - Manual (Page 18)

9
Front and Rear of Unit
➀ ➀ ➀ ➀ Power LED
Lights up in green when the power of the drive is turned on.
➁ ➁ ➁ ➁ Disc tray
The disc tray is used to hold the disc. It slides out from the drive unit when a disc needs to
be loaded or unloaded. (→P. 21)
➂ ➂ ➂ ➂ Manual eject hole
Only use this if no other method is available for unloading a disc. (→P. 22)
➃ ➃ ➃ ➃ Eject button
Press this button when you need to open or close the disc tray. Remove the disc after the
disc tray has opened. (→P. 21)
➄ ➄ ➄ ➄ Headphone jack
You can connect stereo headphones to this stereo mini jack and listen to an audio CD
loaded in the drive.
➅ ➅ ➅ ➅ Headphone volume control
Adjust this control to set a suitable volume level when listening to an audio CD using the
headphone jack. Slide the knob to the left to decrease the volume and to the right to
increase it.
➆ ➆ ➆ ➆ LED
Indicates the operation status of the CRW2200SX drive. (→P. 31)
Front Panel
➃ ➁ ➂ ➀
➄ ➅ ➆