Yamaha CRW2200SX - Manual (Page 19)

Front and Rear of Unit
10
➀ ➀ ➀ ➀ LINE OUT jacks (L/R)
To listen to audio CDs with the CRW2200SX drive, connect these to the line level input
(LINE IN) of the stereo equipment with a standard stereo phono cable (sold separately).
➁ ➁ ➁ ➁ Power switch (STANDBY/ON)
Turns the power on or off. (→P. 14, 17)
➂ ➂ ➂ ➂ DC-IN connector
Insert the included AC adapter connector. (→P. 16)
➃ ➃ ➃ ➃ SCSI connector
Insert the connector of the SCSI cable here. (→P. 14)
A D-sub half-pitch 50-pin pin-type is used. (→P. 15)
➄ ➄ ➄ ➄ Dip switch
Use to set the SCSI ID number and terminator. (→P. 12, 13)
Rear Panel
➃ ➄
➁ ➀ ➂